Cisco Cisco Web Security Appliance S160 User Guide
3-9
Cisco IronPort AsyncOS 7.5 for Web User Guide
Chapter 3 Deployment
Connecting the Appliance to a WCCP Router
Example 2
shows a dynamic service you might create when IP spoofing is enabled and the WCCP service
shown in
is defined.
Figure 3-4
Example WCCP Service — Dynamic Service for IP Spoofing
In this example, the WCCP service defines a dynamic service group with service ID of 90. The
redirection basis is on the source port so it can be used for the return path with IP spoofing enabled.
Suppose in this example that you want to configure the ethernet0 interface on the router for this service
group.
redirection basis is on the source port so it can be used for the return path with IP spoofing enabled.
Suppose in this example that you want to configure the ethernet0 interface on the router for this service
group.
Use the following WCCP configuration for this example:
For more information about enabling IP spoofing when using a WCCP router, see
.
Example 3
Suppose you have the WCCP service shown in
ip wccp version 2
ip wccp 90
interface ethernet0
ip wccp 90 redirect in