Cisco Cisco TelePresence Management Suite (TMS) Version 15 Technical Manual
Custom Commands for Endpoint Configuration
Templates in TMS
Templates in TMS
Document ID: 117357
Contributed by Jason Shupe and Adam Wamsley, Cisco TAC Engineers.
Feb 19, 2014
Feb 19, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Related Products
Configure
Create Simple Command Strings
Create Multi−Part Command Strings
Create Multi−Task Command Strings
Create Simple Configuration Strings
Create Multi−Part Configuration Strings
Create Multi−Task Configuration Strings
Add Created XML Strings to TMS Custom Template
Verify
Troubleshoot
Prerequisites
Requirements
Components Used
Related Products
Configure
Create Simple Command Strings
Create Multi−Part Command Strings
Create Multi−Task Command Strings
Create Simple Configuration Strings
Create Multi−Part Configuration Strings
Create Multi−Task Configuration Strings
Add Created XML Strings to TMS Custom Template
Verify
Troubleshoot
Introduction
This document describes how to configure custom command templates or custom configuration templates
from the Cisco TelePresence Management Suite (TMS).
from the Cisco TelePresence Management Suite (TMS).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco TelePresence Management Suite
•
Cisco TelePresence TC software
•
You must have these accesses and privileges:
Web access to TMS with sufficient privileges in order to access Systems > Configuration Templates
> Configuration Templates
> Configuration Templates
•
Web access to an endpoint that is running Cisco Telepresence TC software with sufficient privileges
in order to access Configuration > API > /command.xml or /configuration.xml
in order to access Configuration > API > /command.xml or /configuration.xml
•
Secure Shell (SSH) or Telnet access to the endpoint with administrator level privileges
•