Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Installation Guide
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Unpacking and Installing the Cisco ONS 15454
Four-Shelf and Zero-Shelf Bay Assembly
Four-Shelf and Zero-Shelf Bay Assembly
Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
Overview
Overview
The Cisco ONS 15454 four-shelf and zero-shelf bay assemblies provide a dual-feed, pre-wired TPA-type
fuse and alarm panel, two vertical fiber ducts, and two 2.38-inch vertical extenders and extender bases.
The four-shelf bay assembly also provides a pre-installed, four-shelf configuration that includes four
ONS 15454 shelf assemblies with electrical interface assembly (EIA) panels or EIA blank cover panels.
fuse and alarm panel, two vertical fiber ducts, and two 2.38-inch vertical extenders and extender bases.
The four-shelf bay assembly also provides a pre-installed, four-shelf configuration that includes four
ONS 15454 shelf assemblies with electrical interface assembly (EIA) panels or EIA blank cover panels.
This guide describes how to unpack and install the Cisco ONS 15454 four-shelf and zero-shelf bay
assembly. Because it is a complete system, installation simply requires you to remove the unit from the
shipping pallet, move the unit into place, secure it, and supply power and ground attachment. Refer to
the Cisco ONS 15454 user documentation for component-specific installation and replacement
procedures.
assembly. Because it is a complete system, installation simply requires you to remove the unit from the
shipping pallet, move the unit into place, secure it, and supply power and ground attachment. Refer to
the Cisco ONS 15454 user documentation for component-specific installation and replacement
procedures.
shows a four-shelf bay assembly.
This guide includes the following sections:
•
•
•
•
•
–
–
–
–
•
•
–
–