Cisco Cisco Expressway
Enable Calls from Microsoft Environment
Command or Action
Purpose
Provide the Microsoft Interoperability service on the Gateway Expressway with a
list of sources of Microsoft calls. The addresses you need depends on how the
Microsoft environment is structured.
list of sources of Microsoft calls. The addresses you need depends on how the
Microsoft environment is structured.
Route Microsoft-originated calls from the Gateway Expressway to the Unified
CM.
CM.
Enable FE Server to route calls for unrecognized destination aliases to the
Gateway Expressway.
Gateway Expressway.
To verify that calls from Microsoft clients are routed properly.
Table 11 Overview of Tasks Required to Enable Calls from Lync Clients to Collaboration Endpoints (All Internal)
Configure the B2BUA Trusted Hosts
When you're creating static routes from the Microsoft environment, you must configure the B2BUA to trust the hosts
at the source of those routes. The hosts that the Expressway needs to trust depend on the structure of the Microsoft
environment:
at the source of those routes. The hosts that the Expressway needs to trust depend on the structure of the Microsoft
environment:
If…
Trust the…
the Microsoft environment has a single FE Server
Microsoft FE Server
the Microsoft environment has multiple front end servers (the deployment
covered by this document)
covered by this document)
Microsoft FE Servers which will be
sending traffic towards the Gateway
Expressways
sending traffic towards the Gateway
Expressways
)
Hardware Load Balancer and the
Directors
Directors
Director
the Microsoft environment has no Director but a Hardware Load Balancer
in front of Front End Servers (see
in front of Front End Servers (see
)
Hardware Load Balancer and the
Microsoft FE Servers
Microsoft FE Servers
1.
Go to Applications > B2BUA > Microsoft interoperability > Trusted hosts.
2.
Click New.
35
Cisco Expressway with Microsoft Infrastructure Deployment Guide
Configuration