Cisco Cisco Unified MeetingPlace Audio Server Installation Guide

Page of 217
Cisco MeetingServer 5.1 Installation Planning Guide  
 
99 
 
Cisco Systems 
                                  
March 2003 
 
9. Phone number to call 
The telephone number called by the system if an alarm occurs. 
The MeetingPlace system checks for alarm conditions every 10 minutes. The 
system outdials immediately to the Alarm Out Call Phone Number, leaving a 
recorded message that an alarm condition has occurred. The system continues 
to leave a message every 30 minutes until the alarm has been cleared.  
The following prompt indicates an alarm condition:  “Hello, this is the 
MeetingPlace System. An Error has occurred which requires your attention.”  
Recommended setting is the telephone or pager number of the system manager. 
 
10. 
24 hour time? 
Whether meetings are scheduled using 24-hour time. The alternative is 
12-hour format (
AM
/
PM
). 
 
11. 
Dial attendant on timeout? 
Whether callers are transferred to the attendant if they do not enter a number 
at the first voice menu. 
 
12. 
# of retry attempts 
The number of times MeetingPlace attempts to call each person when outdial 
is set to Yes for a meeting.  
 
13. 
Delay between retries (sec) 
The number of seconds between outdial retries. 
14. 
Prefix string 
A number string required by certain paging services in some counties. 
MeetingPlace adds this string to the beginning of all pages. This field should 
remain blank if your users’ paging service does not require a prefix string. 
15. 
Suffix string 
A number string required by certain paging services in some counties. 
MeetingPlace will add this string to the end of all pages. This field should 
remain blank if your users’ paging service does not require a suffix string. 
16. 
Shadow attached? 
Whether a MeetingPlace shadow network server is attached to your system.