Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
129
Cisco Systems
March 2003
2. DID meeting access?
Whether MeetingPlace receives Direct Inward Dial number (DID) or Direct
Dial Inward (DDI) information.
Dial Inward (DDI) information.
Your configuration choices depend on the trunking configuration that you
select for MeetingPlace.
select for MeetingPlace.
3. Use DID for routing only?
Determines whether the DID/DDI number is used only to route calls to
various applications. Use this parameter when you have set the “DID
meeting access parameter” to Yes and you want a DID/DDI number to route
directly to a specific MeetingPlace application.
various applications. Use this parameter when you have set the “DID
meeting access parameter” to Yes and you want a DID/DDI number to route
directly to a specific MeetingPlace application.
4.
Address
1
The IP address of an NTP host.
5.
Address
2
The IP address of an alternate NTP host.
6.
Address
3
The IP address of an alternate NTP host.
Note: Alternate NTP hosts are available in the case that one or more of the
NTP servers is down or inaccessible. Also, if all three hosts are accessible,
and one of them is inconsistent, then the inconsistent one will be ignored.
NTP servers is down or inaccessible. Also, if all three hosts are accessible,
and one of them is inconsistent, then the inconsistent one will be ignored.