Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
11
Cisco Systems
March 2003
Travan-NS 20 Cleaning Cartridge
A cleaning cartridge for use with the
Travan-NS tape drive. The head of the tape drive should be cleaned
approximately once a month.
approximately once a month.
MeetingPlace Smart Blades
Components required to provide physical
connectivity to your telephone network.
Smart Blade
The Smart Blade is Latitude’s proprietary high
performance conferencing card. It provides digital signal processing
to ensure the highest voice quality as well as superior conferencing
functions.
to ensure the highest voice quality as well as superior conferencing
functions.
T1 Smart Blade
The T1 Smart Blade enhances the Smart Blade by
adding T1 PSTN connectivity directly to the card.
IP Access Blade
The IP Access Blade enhances the Smart Blade by
including the necessary Ethernet interface for IP-based telephony.
The IP Access Blade supports both the G.711 and H.323 telephony
protocols. MeetingPlace IP is required for full functionality.
The IP Access Blade supports both the G.711 and H.323 telephony
protocols. MeetingPlace IP is required for full functionality.
Multi-Access Blade
Includes the necessary trunk interface card
functionality for T1 ISDN Primary Rate Interface (PRI) and E1 digital
telephony. For T1 PRI, the Multi-Access Blade supports AT&T, Bell, and
Nortel protocols. For E1, the Multi-Access Blade supports Euro ISDN and
QSIG protocols. Each Multi-Access Blade requires at least one Smart Blade.
The Multi-Access Blade supports up to 16 spans.
telephony. For T1 PRI, the Multi-Access Blade supports AT&T, Bell, and
Nortel protocols. For E1, the Multi-Access Blade supports Euro ISDN and
QSIG protocols. Each Multi-Access Blade requires at least one Smart Blade.
The Multi-Access Blade supports up to 16 spans.
Break out Box and Cables
The break out box provides a standard RJ-45
telephony interface for E1/T1 PRI systems. It will interface to a maximum of
16 cables. There will be 16 cables shipped with each Multi-Access Blade
(MA-16) and two Trunk Interface Cables (with Telco 50 connectors) to
connect each MA-16 to the break out box.
16 cables. There will be 16 cables shipped with each Multi-Access Blade
(MA-16) and two Trunk Interface Cables (with Telco 50 connectors) to
connect each MA-16 to the break out box.
Each MeetingPlace M3 server comes equipped with 12 Smart Blade slots.
Each T1 Smart Blade holds 96 PSTN access ports; each IP Access Blade
holds 48 IP access ports.
Each T1 Smart Blade holds 96 PSTN access ports; each IP Access Blade
holds 48 IP access ports.
Note: Since IP Access Blades do not provide conferencing capability, IP
telephony requires the pairing of two IP Access Blades with a Smart
Blade.
telephony requires the pairing of two IP Access Blades with a Smart
Blade.
System Database Disks
The system incorporates two 36-gigabyte hard
drives for MeetingPlace server software and the system database. Space is
allocated equally on each drive, resulting in an extra database and system
space as follows:
allocated equally on each drive, resulting in an extra database and system
space as follows: