Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
Cisco MeetingServer 5.1 Installation Planning Guide
39
Cisco Systems
March 2003
Customer-supplied Connectors
US Canada
Hong Kong
The following table describes wiring of the customer-supplied RJ-48x
connector.
connector.
Table 3-4 Wiring of RJ-48 Connectors
Pin
Name
Description
1 T1
MeetingPlace received signal
tip
2 R1
MeetingPlace received signal
ring
4 T
MeetingPlace outgoing signal
tip
5 R
MeetingPlace outgoing signal
ring
To identify pins, hold the RJ-48 connector as if to plug it in, with the tab
down. Pin 1 is on the left side.
down. Pin 1 is on the left side.
If transmit and receive need to be reversed, the pins need to be reversed also.
Table 3-5 Wiring of RJ-48 Connector-Transmit/Receive Reversed
Pin
Name
Description
1 T
MeetingPlace outgoing signal
tip
2 R
MeetingPlace outgoing signal
ring
4 T1
MeetingPlace received signal
tip
5 R1
MeetingPlace received signal
ring
UK
Singapore
Australia
India
For the E1 card, the connection from the network interface to the network
may be either of the following types:
may be either of the following types:
•
RJ-45 connector
•
SMB coaxial connectors with SMB/BNC adapters
RJ-45
The following figures and describe pinout for the RJ-45 connector. The
cable and plug must be shielded types to ensure EMC compliance.
cable and plug must be shielded types to ensure EMC compliance.