Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-61
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-64 blade Command with IP Precedence and ToS
Note
This configuration must be done for each Multi Access Blade used for an IP configuration.
DSCP
Differentiated Services Code Point (sometimes called “DiffServ”) is the newer mechanism. It is
described in RFC 2474. The DSCP ranges from 0-63. In practice, most implementations use a DSCP
value of 40, which corresponds exactly to an IP Precedence value of 5.
described in RFC 2474. The DSCP ranges from 0-63. In practice, most implementations use a DSCP
value of 40, which corresponds exactly to an IP Precedence value of 5.
The following is an example of how to use the “blade” command to configure a DSCP value of 40.
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program
Enter command: 2
Enter blade slot [1..16]: 16
Type [IP]:
Card Type [TP1610]:
Port Group [ 1]:
Number of Ports [120]:
1st Port [ 46]:
IP address [0] [172.20.18.30]:
IP address [1] [172.20.18.31]:
Subnet Mask [255.255.0.0]:
Default Gateway [172.20.1.1]:
Base UDP Port [0] [ 5000]:
Base UDP Port [1] [ 6000]:
Jitter Buffer Minimum Size [ 100]:
Jitter Buffer Optimization [ 7]:
IP Precedence [0]: 5
Type of Service (TOS) [ 0]: 0
DSCP / DiffServ [unused]: unused
RTCP Interval [default]: