Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-84
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Using MeetingTime to configure ports
Configuring reservationless meetings (optional)
Reservationless meetings are disabled by default. If you would like to enable reservationless meetings,
you need to do so via the “mtgmode” command. For details on the “mtgmode” command, refer to the
you need to do so via the “mtgmode” command. For details on the “mtgmode” command, refer to the
Using MeetingTime to configure ports
After a system restart, the LAN connection becomes active. Locate the MeetingTime media kit that was
included in the system box. Install MeetingTime on the System Manager’s PC. To install MeetingTime,
follow the directions included in the media kit.
included in the system box. Install MeetingTime on the System Manager’s PC. To install MeetingTime,
follow the directions included in the media kit.
This section describes how to use MeetingTime to complete system configuration. The MeetingPlace
Audio Server 5.2 System Manager’s Guide contains complete information about MeetingTime. For these
procedures, you need worksheets 4-5, 4-6, and 4-7 from the MeetingPlace Audio Server 5.2 Installation
Planning Guide. This procedure consists of transferring information from the worksheets to the
MeetingTime screens.
Audio Server 5.2 System Manager’s Guide contains complete information about MeetingTime. For these
procedures, you need worksheets 4-5, 4-6, and 4-7 from the MeetingPlace Audio Server 5.2 Installation
Planning Guide. This procedure consists of transferring information from the worksheets to the
MeetingTime screens.
Step 1
Double click the MeetingTime icon.
appears.