Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
A-48
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Appendix A CLI Reference
recover
recover
Summary
The “recover” command fixes corrupted database structures and forces database and voice file system
consistency.
consistency.
Description
The “recover” command examines all the linkages and structures of the database and voice file system
and forces consistency between all the records. On successful completion, the database should be fully
consistent, although some inconsistent data may have been discarded. This command is useful in cases
where portions of the database have been corrupted due to power failures or other problems.
and forces consistency between all the records. On successful completion, the database should be fully
consistent, although some inconsistent data may have been discarded. This command is useful in cases
where portions of the database have been corrupted due to power failures or other problems.
Warning
The” recover” command should only be run on systems with fully functional and trusted hardware.
This command can cause severe and irreparable damage to a system that is not operating properly at
the hardware level. Do not use this command on a system that does not have all of its disk drives
installed and operating correctly.
This command can cause severe and irreparable damage to a system that is not operating properly at
the hardware level. Do not use this command on a system that does not have all of its disk drives
installed and operating correctly.
Restrictions
The time required for this command to run is proportional to the number of records in the database and
the amount of voice storage. On a system with a large database and a lot of voice storage, this may take
many hours.
the amount of voice storage. On a system with a large database and a lot of voice storage, this may take
many hours.
Caution
We suggest running a system backup before running recover.
MeetingPlace must be down to run the “recover” command. Use the “down” command to shut down
MeetingPlace.
MeetingPlace.
SEE ALSO
•
•