Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
A-62
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Appendix A CLI Reference
swcheck
swcheck
Summary
The “swcheck” command verifies the software file checksums.
Description
The “swcheck” command generates a 32-bit CRC checksum on each of the application software files in
the system and then compares the generated checksums against known good values. Any discrepancies
are displayed.
the system and then compares the generated checksums against known good values. Any discrepancies
are displayed.
Note
Some software patches may not update the checksum file. This results in discrepancies when the
“swcheck” command is run. In this particular case, discrepancies are expected and should not be a cause
for alarm.
“swcheck” command is run. In this particular case, discrepancies are expected and should not be a cause
for alarm.
Note
The “swcheck” command is useful for diagnosing certain system integrity problems. Unexplained
discrepancies can result from file corruption or a failure to correctly transfer data from the system disk.
In the latter case, running this command again yields a different result.
discrepancies can result from file corruption or a failure to correctly transfer data from the system disk.
In the latter case, running this command again yields a different result.
SEE ALSO
•