Cisco Cisco Unified MeetingPlace Audio Server Installation Guide
3-20 Telephony and LAN planning
Cisco MeetingPlace Audio Server Installation Planning Guide
February 27, 2004
Customer-supplied connectors
The following table shows the wiring of the customer-supplied RJ-48x
connectors.
connectors.
To identify pins, hold the RJ-48 connector as if to plug it in, with the tab
down. Pin 1 is on the left side.
down. Pin 1 is on the left side.
If transmit and receive need to be reversed, reverse the pins, as shown in the
following table.
following table.
For the E1 card, the connection from the network interface to the network can
be either of the following types:
be either of the following types:
•
RJ-45connector
•
SMB coaxial connectors with SMB/BNC adapters
Pin
Name
Description
1
T1
MeetingPlace received signal—tip
2
R1
MeetingPlace received signal—ring
4
T
MeetingPlace outgoing signal—tip
5
R
MeetingPlace outgoing signal—ring
Pin
Name
Description
1
T
MeetingPlace outgoing signal—tip
2
R
MeetingPlace outgoing signal—ring
4
T1
MeetingPlace received signal—tip
5
R1
MeetingPlace received signal—ring
U.S.
anada
Hong Kong
U.K.
ingapore
Australia
India