Cisco Cisco Unified MeetingPlace Audio Server Installation Guide

The following is an example of how to use the blade command to configure a 
DSCP value of 40.

This configuration needs to be done for each IP blade.

As a system manager, you need access to a Windows-based PC from which to 
configure MeetingPlace using MeetingTime. The system you use does not 
need to be dedicated to system management—you can use any PC on 
the LAN.

This section explains how to:

•

Make sure your LAN is compatible

•

Decide whether you need additional desktop workstations and network 
software for end users, contacts, and attendants

•

Decide whether you need additional hardware and software to manage the 
system

Enter command:

2

Enter blade slot [1..16]:

16

Type [IP]:

Card type

[ TP1610]:

Port Group

[ 1]:

Number of Ports

[120]:

1st Port

[ 46]:

IP Address [0]

[172.20.18.30]:

IP Address [1]

[172.20.18.31]:

Subnet Mask 

[255.255.0.0]:

Default Gateway

[172.20.1.1]:

Base UDP Port [0]

[ 5000]:

Base UDP Port [1]

[ 6000]:

Jitter Buffer Minimum Size

[100]:

Jitter Buffer Optimization

[ 7]:

RTCP Interval

[default]: