Cisco Cisco Unified MeetingPlace Audio Server Installation Guide

NTP server IP address

It is recommended that you time synchronize your MeetingPlace 
system with a Network Time Protocol (NTP) server. (For more 
information, see 

)

Broadcast traffic

• If the rate of broadcast or multicast packet generation on the 

LAN segment exceeds an average of 40/second, the Ethernet 
link from MeetingPlace into the local LAN must be 
configured for 100Mb to avoid congestion of the link.

• If broadcast and multicast traffic exceeds 100 packets/second, 

the MeetingPlace system should be isolated from the segment 
using a router.

MeetingTime network 
requirements

• MeetingTime must be able to open a TCP connection on ports 

5001 and 5005 to connect to the network and/or conference 
server.

• For MeetingTime to access recordings and attachments, the IP 

address of the conference server must not be translated using a 
network address translation scheme.

MeetingTime LAN speed 
recommendations

To schedule and monitor small (2–10 participants) meetings:

• Required: 28 kbs

• Recommended: 40 kbs

To monitor medium meetings (11–60 participants):

• Required: 35 kbs

• Recommended: 50 kbs

To monitor large meetings (61–120 participants):

• Required: 50 kbs

• Recommended: 128 kbs