Cisco Cisco Unified MeetingPlace Audio Server Installation Guide

The following worksheet describes the MeetingPlace IP Gateway 
requirements.

Call management 
server

One of the following:

• Cisco CallManager (version 3.22 and above) configured to route 

calls to the MeetingPlace IP Gateway Windows server. 

• Avaya IP Communication Manager (version 1.3 and above) 

configured to route calls to the MeetingPlace IP Gateway 
Windows server. (For configuration information, go to the 
Customer Support Resource Center for Cisco MeetingPlace
(http://support.latitude.com).

• Cisco Proxy server 1.0 and above

• Alcatel A5020 IP Softswitch

• H.323 endpoints

MeetingPlace Audio 
Server

• MeetingPlace 8112 or 8106 platform with MeetingPlace Audio 

Server 5.2 or higher

• One primary IP address for communication with the 

MeetingPlace IP Gateway Windows server and other gateways 
and clients

• Extra IP addresses for every 240 user licenses of IP. For 

example, if you have 960 user licenses of IP, you will require 
four IP addresses, with two IP connections (one per MA-16 
Blade).

Windows Server 

• Windows server with the following minimum requirements:

- 1 GHz Pentium III

- 512 MB RAM, 4GB disk space

• Windows 2000 or Advanced Server with Service Pack 4 or later 

and all corresponding Microsoft security patches installed 

• Network Interface Card

• CD-ROM  drive

• Microsoft Windows Networking Support

• TCP/IP protocol

• One primary IP address for communication with the 

MeetingPlace server and the soft switch server (for example, 
Cisco CallManager or Avaya IP Communication Manager)

If MeetingPlace IP Gateway and MeetingPlace Web are 

installed on the same system, you will require an extra IP address 
assigned to MeetingPlace Web (resulting in two IP addresses).