Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
Cisco MeetingServer 5.1 System Manager’s Guide
74
Cisco Systems
March 2003
When MeetingPlace does not receive dialed number information, the default
port access type assigned to a call is the type assigned in the Ports topic
(Configure tab) to the port that is handling the call. If your system does not
receive dialed number information, you may want to map out the
connections between MeetingPlace and the telephone network. Then decide
what access type to assign to each line or group of lines that connects to
MeetingPlace, or choose to use all ports universally with combined access.
port access type assigned to a call is the type assigned in the Ports topic
(Configure tab) to the port that is handling the call. If your system does not
receive dialed number information, you may want to map out the
connections between MeetingPlace and the telephone network. Then decide
what access type to assign to each line or group of lines that connects to
MeetingPlace, or choose to use all ports universally with combined access.
If you find that users are having difficulty accessing a particular service, you
may wish to reconfigure the number of ports assigned to each of the
MeetingPlace services using the Ports topic.
may wish to reconfigure the number of ports assigned to each of the
MeetingPlace services using the Ports topic.
Figure 0-2 MeetingPlace Port Configuration Tab
Note: If you assign an individual port to a port group, you do
not have to re-enter data that is already provided for the port
group.
not have to re-enter data that is already provided for the port
group.
You can configure MeetingPlace ports to allow or disallow outdialing. Make
sure that the trunk is configured in MeetingPlace the same way your
telephony provider has configured it (it can either make outgoing calls or
cannot make outgoing calls). MeetingPlace can block certain numbers and
dialing patterns system-wide, by group, or by individual user. Call blocking
is controlled by an internal MeetingPlace table. Contact your MeetingPlace
support representative to configure this table.
sure that the trunk is configured in MeetingPlace the same way your
telephony provider has configured it (it can either make outgoing calls or
cannot make outgoing calls). MeetingPlace can block certain numbers and
dialing patterns system-wide, by group, or by individual user. Call blocking
is controlled by an internal MeetingPlace table. Contact your MeetingPlace
support representative to configure this table.
Configuring Port Groups
Because multiple ports may use identical settings, the MeetingPlace database
uses port groups to define the settings for multiple ports simultaneously. You
define a port group by selecting the Port Groups topic in the Configure tab.
uses port groups to define the settings for multiple ports simultaneously. You
define a port group by selecting the Port Groups topic in the Configure tab.