Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
Solving problems 7-35
February 27, 2004
Cisco MeetingPlace Audio Server System Manager’s Guide
Administering MeetingPlace through modem interface
The MeetingPlace server comes with a modem with which you can connect to
the MeetingPlace system remotely. This interface also allows you to
administer the MeetingPlace server through MeetingTime. To do this, you
need a computer with the following:
the MeetingPlace system remotely. This interface also allows you to
administer the MeetingPlace server through MeetingTime. To do this, you
need a computer with the following:
•
A modem
•
Windows 98, NT, or 2000
•
MeetingTime software
Configure the dial-up connection that is provided with each operating system
to dial up the MeetingPlace server. For example, in Windows NT, do the
following:
to dial up the MeetingPlace server. For example, in Windows NT, do the
following:
1.
In Windows, choose
Start
menu >
Programs
>
Accessories
>
Dial-up
Networking
.
2.
In the Dial-up Networking dialog box, click
New
to display the New
Phonebook Entry dialog box.
3.
For
Entry name
and
Phone number
, enter a name to identify your
MeetingPlace Server, and the phone number for your MeetingPlace
modem. For
modem. For
Dial using
, choose a modem. Then click the
Server
tab to
configure the slip connection.
4.
In the Server tab, do the following:
•
For
Dial-up server type
, choose
SLIP
.
•
For
TCP/IP
, make sure the checkbox is selected.
•
Click the
TCP/IP Settings
button to configure TCP/IP.
5.
In the SLIP TCP/IP Settings dialog box, do the following, then click
OK
:
•
Make sure
IP address
is set to 198.207.208.242.
•
Make sure
Force IP header compression
and
Use default gateway on
remote network
are cleared (not selected).
•
Keep
Frame size
at 1006.
6.
In the New Phonebook Entry dialog box, click
OK
.
After configuring the dialup networking connection, from this point on
you only need to select the phonebook entry that corresponds to your
MeetingPlace server. After you are connected to the MeetingPlace server,
you can start your MeetingTime client.
you only need to select the phonebook entry that corresponds to your
MeetingPlace server. After you are connected to the MeetingPlace server,
you can start your MeetingTime client.