Cisco Cisco Customer Voice Portal 8.0(1)
Figure 6: Call Management Administration - Defining a Trunk
Note: SIP is automatically selected for device protocol.
Click Next.
Step 7
The next Trunk Configuration window has many sections. Configure only the following items:
a.
In the Device Information section:
Device Name: VoiceGateway
Description: Gateway trunk for standalone exercises
Device Pool: Select Default from the drop-down menu.
b.
Scroll down. In the SIP Information section:
Destination Address: Enter the IP address of the voice gateway.
SIP Trunk Security Profile: From the drop-down menu, select Non Secure SIP Trunk Profile.
SIP Profile: From the drop-down menu, select Standard SIP Profile.
Step 8
Click Save to save the definition.
Click OK at the reset prompt. You will do this later.
The message Added Successful displays. Or, if you did not enter all the required items, the
wizard prompts you to correct specific entries.
wizard prompts you to correct specific entries.
Step 9
Click Reset to display the Device Reset window. Click Reset on this window to make the
changes effective.
changes effective.
Getting Started with Cisco Unified Customer Voice Portal Release 8.0(1)
30
Chapter 4: Optionally, Prepare to Use IP Phones for the Exercises
Modify the Exercises to Use a VoIP Phone through Unified Communications Manager