Cisco Cisco Customer Voice Portal 8.0(1)
Standalone Example.tpt
Standalone Getting Started Exercises
Step 4
Check the box: Enable template modification.
Step 5
Highlight and delete all the contents of the template.
Step 6
From Notepad (or the editor you used) copy the entire sample template you modified, then paste
the contents into the empty template file in the Operations Console.
the contents into the empty template file in the Operations Console.
Step 7
In the Operations Console click Save to save a new template based on the example configuration.
Note: You can use a similar process to convert a saved gateway configuration to a template you
can use within the Operations Console. Be sure to add the two required lines at the top of the
template:
can use within the Operations Console. Be sure to add the two required lines at the top of the
template:
! Customer Voice Portal 8.0(1) IOS Template
conf t
Push the Configuration Changes to Your Gateway and Verify the Changes were Pushed
In this task you use the Operations Copnsole to update the gateway configuration from its
existing running-config to the template configuration you created for the standalone getting
started exercises.
existing running-config to the template configuration you created for the standalone getting
started exercises.
Step 1
From the Operations Console select: System > IOS Configuration > IOS Template
Deployment.
Deployment.
Step 2
From the Select Template dropdown, select the template you just created.
Step 3
In the Associate Gateway(s) pane, select the gateway you previously added to the Operations
Console for this exercsise and click the right arrow button.
Console for this exercsise and click the right arrow button.
Step 4
Click Preview and Deploy. You should see the template previewed with the message The IOS
Template is valid and ready for Gateway deployment.
Template is valid and ready for Gateway deployment.
Note: The validation process only checks for proper template variables, not gateway configuration
syntax. There are no variables in the template for the standalone exercises.
syntax. There are no variables in the template for the standalone exercises.
Step 5
Scroll down and click Deploy, then verify the comand.
You see the message: The IOS Template deployment has started. For detailed information,
select the Deployment status button.
select the Deployment status button.
Step 6
Click the Deployment Status icon.
Step 7
The Deployment Status window displays showing the status as In Progress. Wait a minute and
click Refresh to determine if the deployment is complete.
click Refresh to determine if the deployment is complete.
Getting Started with Cisco Unified Customer Voice Portal Release 8.0(1)
52
Chapter 6: Unified CVP VXML Server Standalone Call Flow Model Exercise (HelloWorld)
Configure Your Voice Gateway for VXML Server Calls