Cisco Cisco TelePresence Management Suite (TMS) Version 15
1. Between the endpoint and the call controller.
2. Between the call controller and TelePresence Conductor.
3. Between TelePresence Conductor and the conference bridge (always mandatory anyway).
CAUTION:
Unless TLS signaling is in place for all three elements, the call cannot support SRTP.
Configuration Information
Conference bridges must have the encryption key enabled and be configured to use TCP port 5061 and
signaling mode TLS (
SIP Settings
page).
Specify TCP port 5061 and TLS signaling mode on the TelePresence Conductor Location and on the call
controller (SIP Trunk Security Profile for Unified CM; Neighbor Zone for Cisco VCS).
See the appropriate deployment guide for details:
n
Centric deployments.
n
for Cisco VCS-Centric
deployments.
Configuring CMR Hybrid
Cisco MCU
Task
Detailed Instructions
Configure SIP
Configure the Content Mode.
Configure the Video and Audio Codecs.
Configure the Automatic Content Handover.
Table 10: Checklist — Configuring CMR Hybrid on the MCU for the First Time
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.6 - WebEx WBS29.11)
Page 62 of 254
Configuration Checklist
Configuration Task Checklist