Cisco Cisco Video Surveillance 6050 IP Camera Installation Guide
C H A P T E R
2-1
Cisco Video Surveillance 6050 IP Camera Installation Guide
OL-31413-01
2
Camera Installation
This chapter provides information and instructions for installing the Cisco Video Surveillance 6050
IP Camera.
IP Camera.
The IP camera requires a network cable and a connection to a standard 10/100BaseT router or switch.
To power the IP camera with Power over Ethernet (PoE), a switch must be 802.3af compliant.
To power the IP camera with Power over Ethernet (PoE), a switch must be 802.3af compliant.
This chapter includes the following topics:
•
•
Warnings Before Installation
•
Power off the IP camera if smoke or
unusual odors are detected.
unusual odors are detected.
Contact your Cisco representative if these
situations occur.
situations occur.
•
Keep the IP camera away from water. If the
IP camera becomes wet, power it off
immediately.
IP camera becomes wet, power it off
immediately.
Contact your Cisco representative if this
situation occurs.
situation occurs.
•
Refer to the data sheet for the operating
temperature.
temperature.
•
Do not place the IP camera on unsteady
surfaces.
surfaces.