Cisco Cisco 6015 IP DSL Switch Troubleshooting Guide

Set the configuration register back to 0x2102 and reset the system.

rommon 4 > confreg 0x2102

rommon 5 > reset

13.

Display the name of the Flash file that begins ni2− and use it as the filename in step 15.

DSLAM#dir flash:

Directory of flash:/

1 −rw− 9447084 Jan 01 2000 00:13:03 ni2−dsl−mz.121−5.DA1.bin

15990784 bytes total (6543572 bytes free)

14.

Delete the Flash file name found in step14. Repeat step 14 and step 15 until all files in the Flash have
been deleted.

DSLAM#delete flash:ni2−dsl−mz.121−5.DA1.bin

Delete filename [ni2−dsl−mz.121−5.DA1.bin]?

Delete flash:ni2−dsl−mz.121−5.DA1.bin? [confirm]

15.

Recover available space in Flash memory.

DSLAM#squeeze flash:

All deleted files will be removed. Continue? [confirm]

Squeeze operation may take a while. Continue? [confirm]

Squeeze of flash complete

16.

Copy the Cisco IOS Software image from a TFTP server to Flash.

DSLAM#copy tftp: flash:

Address or name of remote host [171.69.89.140]?

Source filename [ni2−dsl−mz.122−1b.DA.bin]?

Destination filename [ni2−dsl−mz.122−1b.DA.bin]?

Accessing tftp://171.69.89.140/ni2−dsl−mz.122−1b.DA.bin...

Loading ni2−dsl−mz.122−1b.DA.bin from 171.69.89.140 (via Ethernet0/0): !!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK − 9447084/18893824 bytes]

9447084 bytes copied in 128.940 secs (73805 bytes/sec)

17.

Enter global configuration mode and disable the boot from system. Save your changes to the
start−up configuration and reload the system to upgrade the image.

DSLAM(config)#no boot system

18.