Cisco Cisco 6015 IP DSL Switch Troubleshooting Guide

Page of 6
 DSLAM(config)#end
 DSLAM(config)#write memory
 DSLAM(config)#reload
Confirm that the running image is ni2−dsl−mz.122−1b.da. If it is not, go to step 17.
DSLAM#show version
Cisco Internetwork Operating System Software
IOS (tm) NI2 Software (NI2−DSL−M), Version 12.2(1b)DA, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986−2001 by cisco Systems, Inc.
Compiled Mon 20−Aug−01 14:13 by torowe
Image text−base: 0x80008308, data−base: 0x814CC000
ROM: System Bootstrap, Version 12.0(5)DA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTLDR: NI2 Software (NI2−DBOOT−M), Version 12.2(1b)DA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
DSLAM uptime is 28 minutes
System returned to ROM by reload at 00:06:58 UTC Sat Jan 1 2000
System image file is "flash:ni2−dsl−mz.122−1b.DA.bin"
cisco 6100 (NI2) processor with 60416K/5120K bytes of memory.
RC64475 CPU at 100Mhz, Implementation 48, Rev 0.0
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
8 DMT DSL Port interface(s)
4 ATM network interface(s)
522232 bytes of non−volatile configuration memory.
4096K bytes of Boot Flash (Sector size 128K).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
19. 
Erase all information in bootflash memory. Answer y to confirm all questions. When the DSLAM
returns you to the EXEC prompt, bootflash memory is successfully formatted and ready for use.
Ensure that the bootflash is 3.8 MB total. If it is not, go to step 14.
DSLAM#format bootflash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "bootflash:".  Continue? [confirm]
Formatting sector 1
Format of bootflash: complete
20. 
Copy the boot image from a TFTP server to the bootflash.
DSLAM#copy tftp://171.69.89.140/ni2−dboot−mz.122−1b.DA.bin bootflash:
Destination filename [ni2−dboot−mz.122−1b.DA.bin]?
Accessing tftp://171.69.89.140/ni2−dboot−mz.122−1b.DA.bin...
Loading ni2−dboot−mz.122−1b.DA.bin from 171.69.89.140 (via Ethernet0/0): !!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK − 3712100/7424000 bytes]
3712100 bytes copied in 69.476 secs (53798 bytes/sec)
21. 
Reload the DSLAM to make it boot from the new Cisco IOS Software image.
DSLAM#reload
22. 
Confirm the DSLAM booted from the new Cisco IOS Software image by issuing a show version
command.
23.