Cisco Cisco HDT Network Storage Hard Drive Trays Administrator's Guide
Troubleshooting
Cannot Access the NSS through FTP
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
164
A
To resolve the problem:
STEP 1
From the Manager Menu, click Storage
Volumes.
If the problem is due to the volume being locked, the Unlock button appears next
to the volume in the Action column.
to the volume in the Action column.
STEP 2
Click Unlock.
STEP 3
Enter the password for the volume.
STEP 4
Click OK.
You can now be create a share or quota for the volume.
Cannot Access the NSS through FTP
Users attempt to log into the NSS through FTP but are unable to access their home
directory or shares on the NSS.
directory or shares on the NSS.
To resolve the problem, you need to configure these settings to enable
FTP access:
FTP access:
STEP 1
From the Manager Menu, click Shares
FTP Setup.
STEP 2
Make sure that Enable FTP is selected. (You can go through the settings on this
page to ensure they are correctly defined.)
page to ensure they are correctly defined.)
STEP 3
Close the FTP Setup page.
STEP 4
From the Manager Menu, click Shares
Shares.
STEP 5
Click Edit for the applicable share.
STEP 6
Make sure the FTP protocol is selected, and then click Update.
STEP 7
From the Manager Menu, click Access
Network.
STEP 8
Make sure there are no filters set up to drop or reject FTP access for the
applicable IP or MAC addresses.
applicable IP or MAC addresses.