Cisco Cisco TelePresence Management Suite (TMS) Version 15 Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Verify
Troubleshoot
Related Cisco Support Community Discussions
Introduction
This document describes configuration changes and requirements when migrating Telepresence
Codec (TC) endpoints from Video communication Server (VCS) to Cisco Unified Communications
Manager (CUCM) and specific requirements of changing the provisioning on the endpoint
from Telepresence Management Suite (TMS) to CUCM. Post the migration software Upgrade,
Directory and registration is expected to work through the CUCM.
Codec (TC) endpoints from Video communication Server (VCS) to Cisco Unified Communications
Manager (CUCM) and specific requirements of changing the provisioning on the endpoint
from Telepresence Management Suite (TMS) to CUCM. Post the migration software Upgrade,
Directory and registration is expected to work through the CUCM.
The document also discusses some of the known limitations when provisioning is changed from
TMS to CUCM.
TMS to CUCM.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
The endpoint is provisioned with TMS and the following services with TMS work fine
●
- Phonebook Service
- Backup and Restore performed by TMS
- Software Upgrade from TMS
- Persistent Template
Components Used
The information in this document is based on Cisco Telepresence Endpoint runing TC 7.3.x, TMS
14.6.x and CUCM 10.x
14.6.x and CUCM 10.x
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any configuration.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any configuration.