Cisco Cisco TelePresence Management Suite (TMS) Version 15 Troubleshooting Guide

Update Settings on Cisco TMS when a System is
Moved to a New Location

Document ID: 118389

Contributed by Cisco TAC Engineers.

Oct 31, 2014

Contents

Introduction
Prerequisites
Requirements
Components Used
Update Settings on Cisco TMS when a System is Moved to a New Location

Introduction

This document describes how to update the settings on Cisco TelePresence Management Suite (TMS) when
you change aliases or move a system to a new location.

Prerequisites

Requirements

Cisco recommends that you have knowledge of Cisco TMS.

Components Used

The information in this document is based on Cisco TMS.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Update Settings on Cisco TMS when a System is Moved to a
New Location

In order to communicate with a system, Cisco must have a network address such as an IP address or Domain
Name System (DNS) hostname address.

A system is uniquely identified in Cisco TMS by the Track system on network by setting defined for each
system. This setting can be set to an IP address, MAC address, or a hostname. When you use MAC address or
hostname choices, the IP address used to reach the system can be automatically updated if the system's actual
IP address changes.

Note: Track by MAC Address or Hostname is not supported for all device types.