Cisco Cisco TelePresence Management Suite (TMS) Version 15 Troubleshooting Guide
TelePresence Management Suite Reports 'No
HTTP response' for a System
HTTP response' for a System
Document ID: 118387
Contributed by Cisco TAC Engineers.
Oct 29, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Problem
Solution
Prerequisites
Requirements
Components Used
Background Information
Problem
Solution
Introduction
This document describes how to solve the problem of when the Cisco TelePresence Managment Suite (TMS)
reports a 'No HTTP response' message for a system.
reports a 'No HTTP response' message for a system.
Prerequisites
Requirements
Cisco recommends that you have knowledge of Cisco TMS.
Components Used
The information in this document is based on Cisco TMS.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Background Information
If you click Force Refresh it clears the error, but the error returns later.
Problem
Cisco TMS reports 'No HTTP response' for a system.