Cisco Cisco TelePresence MCU 4510 Release Notes
Updating to 4.3
Cisco TelePresence MCU 4.3(2.18) Software Release Notes
Page 13 of 16
Equipment
Software revision
Comments
Polycom
PathNav
PathNav
7.00.03
No issues found.
GNU
Gatekeeper
Gatekeeper
2.3.1
No issues found.
Updating to 4.3
Prerequisites and software dependencies
CAUTION
: You must back up your configuration before upgrading to Version 4.3.
You must also remember the administrator user name and password for the backup configuration. You
will need these if you ever need to make use of this backup file.
will need these if you ever need to make use of this backup file.
Upgrading causes all CDRs to be deleted.
If you are using Call Detail Records (CDR) for billing,
auditing or any other purpose, before you upgrade to this release, you must download and save your
current CDR data.
current CDR data.
Also, if you downgrade from this release to any older version, the MCU will delete all
existing CDRs.
Upgrade instructions
Using a web browser
1.
Unzip the image file.
2.
Browse to the IP address of the MCU using a web browser.
3.
Log in as an administrator.
4.
Go to the
Settings > Upgrade
page.
5.
In the Main software image section, type in, or browse to the location of the software image file.
6.
Click Upload software image.
A progress bar is displayed in a separate pop-up window while the web browser uploads the file to the MCU or
MSE media blade. This takes some time – dependent on your network connection. Do not move your web
browser away from the Upgrade software page or refresh this page during the upload process; otherwise, it will
abort.
After a number of minutes, the web browser refreshes automatically and displays “Main image upload completed
successfully”.
MSE media blade. This takes some time – dependent on your network connection. Do not move your web
browser away from the Upgrade software page or refresh this page during the upload process; otherwise, it will
abort.
After a number of minutes, the web browser refreshes automatically and displays “Main image upload completed
successfully”.
7.
Click Close Status window.
8.
In the changed Upgrade page, click Shut down MCU.
9.
Click Confirm MCU shutdown.
10. When shutdown has completed, click Restart MCU and upgrade.
11. When prompted, confirm the restart. The unit will restart and upgrade itself – this may take up to 25 minutes to
complete.
Using FTP
1.
Use an FTP client to connect to the MCU – e.g. ftp <MCU IP Address> from the command prompt.
2.
Log in as an administrator.