Cisco Cisco TelePresence MCU 4510 Release Notes
Using the Bug Search Tool
Cisco TelePresence MCU 4.3(2.18) Software Release Notes
Page 14 of 16
3.
Upload the upgrade file from the command prompt. For example:
put codian_mcu_4.3(2.18)
4.
When the upload has completed, go to the Upgrade page within the web interface.
5.
Click
Shut down MCU and upgrade.
6.
Click
Confirm MCU shutdown
.
7.
When shutdown has completed, click
Restart MCU and upgrade
.
8.
When prompted, confirm the restart. The unit will restart and upgrade itself – this may take up to 25 minutes.
Not e
: If you have been logged out due to inactivity, log in again as admin and click
Restart MCU and upgrade
on the Shutdown page.
Notes
The progress of the upgrade can be monitored through the serial port
Before upgrading, make sure that the MCU is not in use. Anyone using the MCU at the time of the upgrade may
experience poor performance and loss of connectivity
experience poor performance and loss of connectivity
Downgrade instructions
If you need to reverse your upgrade, you can re-install the former version of the software. The downgrade procedure
is the same as for the upgrade except that it uses the earlier software image.
is the same as for the upgrade except that it uses the earlier software image.
CAUTION:
If you use CDR data for any purpose you must download and save the CDR data before
you downgrade to an earlier version.
To downgrade from release 4.3:
1.
Go to
Settings > Upgrade
.
2.
In the Restore configuration area, locate a configuration.xml file that is compatible with the release to which
you want to downgrade.
you want to downgrade.
3.
Check the User settings check box.
4.
If required, check the Network settings check box.
5.
Click Restore backup file.
6.
When the configuration has been restored, follow the instructions as detailed in Upgrade instructions above.
Using the Bug Search Tool
The Bug Search Tool contains information about open and resolved issues for this release and previous releases,
including descriptions of the problems and available workarounds. The identifiers listed in these release notes will
take you directly to a description of each issue.
including descriptions of the problems and available workarounds. The identifiers listed in these release notes will
take you directly to a description of each issue.
To look for information about a specific problem mentioned in this document:
1.
Using a web browser, go to the
2.
Sign in with a Cisco.com username and password.
3.
Enter the bug identifier in the Search field and click Search.
To look for information when you do not know the identifier:
4.
Type the product name in the Search field and click Search.