Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Adding FindMe location templates
The endpoint devices available to FindMe users may vary depending on their current location. You can add location
templates to represent these variations.
templates to represent these variations.
For example, use location templates to represent different physical locations such as "home" or "office", as well as
different circumstances such as "on vacation" or "in a meeting".
different circumstances such as "on vacation" or "in a meeting".
To add FindMe location templates:
1.
In Cisco TMS, go to System > Provisioning > FindMe, and then click the Location Templates container. If one or
more location templates have already been added, they are displayed in the explorer view. If no templates exist,
you will see this:
more location templates have already been added, they are displayed in the explorer view. If no templates exist,
you will see this:
2.
Above the explorer view, click Add Location Template. The Add Location Template dialog box is displayed.
3.
Configure the fields as follows:
Display
Name
Name
The FindMe location name; for example,
Office
, Home Office or On the Road. This appears as a
FindMe location when users configure their FindMe.
Ring
Duration
Duration
This setting defines how long (in seconds) to let the devices in the current location ring before the
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
4.
Click Save.
Associating Device Templates with Location Templates
For each location template you add, you must designate at least one device that should be dialed by default whenever a
user's FindMe address is contacted.
user's FindMe address is contacted.
You can also specify which devices to dial:
66
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide