Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Enabling provisioning on the Cisco VCS
Setting up a Cisco VCS cluster and enabling provisioning are separate processes and should not be
attempted simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and
complete the provisioning configuration as described below. Then set up the cluster as described in
attempted simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and
complete the provisioning configuration as described below. Then set up the cluster as described in
.
Setting up a cluster name
When using FindMe, you must set up the Cisco VCS with a cluster name regardless of whether it is part of a
cluster. The cluster name must be unique compared to any other Cisco VCS or Cisco VCS cluster managed
by this Cisco TMS.
cluster. The cluster name must be unique compared to any other Cisco VCS or Cisco VCS cluster managed
by this Cisco TMS.
To set up or change the cluster name:
1. Go to
System > Clustering
.
2. Enter the Cluster name:
l
If the Cisco VCS is part of a cluster, set it to the fully qualified domain name used in SRV records that
address the cluster, for example "cluster1.example.com".
address the cluster, for example "cluster1.example.com".
l
If the Cisco VCS is not part of a cluster, set it to the fully qualified domain name used in SRV records
that address the Cisco VCS, for example "vcs1.example.com".
that address the Cisco VCS, for example "vcs1.example.com".
3. Click Save.
Enabling Presence on the Cisco VCS
Endpoints such as Jabber Video can use Cisco VCS as a presence server to share presence information (for
example Offline, Online, Away, or Busy) with other users.
example Offline, Online, Away, or Busy) with other users.
n
You must only enable presence on a single Cisco VCS or Cisco VCS cluster per SIP domain in your
deployment.
deployment.
n
Enabling Presence is optional.
Presence on VCS Control
1. In VCS Control, go to
Applications > Presence
and set SIP SIMPLE Presence Server to On.
2. If VCS Control is to publish presence on behalf of endpoints registered to it that do not publish their own
presence (that is, endpoints other than Jabber Video), you must also set SIP SIMPLE Presence User
Agent to On.
Agent to On.
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide (1.4)
Page 24 of 96
Configuring Cisco VCS for provisioning