Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Configuring how Cisco VCS handles calls to unknown IP
addresses
addresses
The Calls to unknown IP addresses setting determines the way in which the Cisco VCS attempts to call
systems which are not registered with it or one of its neighbors.
systems which are not registered with it or one of its neighbors.
It is configured on the
Dial plan configuration
page (
Configuration > Dial plan > Configuration
).
VCS Control
Set the VCS Control to use the Indirect mode for Calls to unknown IP addresses.
VCS Expressway
If you are using a VCS Expressway, it must be set to use the Direct mode for Calls to unknown IP
addresses.
addresses.
Adding the Cisco VCS to Cisco TMS
This procedure is compulsory for the Cisco VCS (or Cisco VCS cluster) on which provisioning is enabled
(typically the VCS Control), and optional for other Cisco VCSs (a VCS Expressway, for example).
(typically the VCS Control), and optional for other Cisco VCSs (a VCS Expressway, for example).
In each Cisco VCS:
1. We recommend enabling SNMP as this is the best way for Cisco TMS to be able to detect and add the
Cisco VCS:
l
Go to
System > SNMP
and ensure that SNMP mode is set to v3 plus TMS support and an SNMP
community name is set.
Cisco TMSPE Provisioning Deployment Guide
Page 15 of 78
Configuring Cisco VCS for provisioning