Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
other users who will never need access to the portal. For further information about individual and group
FindMe accounts, see
FindMe accounts, see
To add a FindMe group:
1. In Cisco TMS, go to
Systems > Provisioning > FindMe
.
2. In the
Accounts and Groups
container, click the parent of the group you want to create.
3. Above the explorer view, click Add Group.
The
Add Group
dialog box is displayed.
4. In the Display Name field, enter a name for the group.
5. Click Save.
To add a FindMe account:
1. In Cisco TMS, go to
Systems > Provisioning >
FindMe.
2. In the
Accounts and Groups
container, navigate to the group into which you want to add an account.
3. Above the explorer view, click Add Account.
The
Add Account
dialog box is displayed.
4. Configure the fields as follows:
Display Name
Display name for the account.
Username
Username for the account.
FindMe Address
The FindMe ID for the account.
Caller ID
Callback number that is used when a FindMe call is routed through an ISDN
gateway
gateway
Account Type
Select Individual or Group.
Setting up FindMe locations and devices
You create FindMe location and device templates if you want to provide FindMe users with locations and
devices when they access the FindMe User Portal. The information you provide is passed on to and used by
the configured VCSs.
devices when they access the FindMe User Portal. The information you provide is passed on to and used by
the configured VCSs.
To set up FindMe locations and devices, complete the following tasks:
1.
2.
3.
4.
5.
Suggested minimum setup
For a minimum FindMe setup we recommend taking the following approach:
1. Enable FindMe with the Include Provisioned Devices field set to Set as default device for user's active
location. This option results in a device being added to the FindMe portal of the associated account when
the user logs in and the device is provisioned. The device is also set as an initial device to ring at the
active location. See
the user logs in and the device is provisioned. The device is also set as an initial device to ring at the
active location. See
Cisco TMSPE Provisioning Deployment Guide
Page 49 of 78
Deploying FindMe