Cisco Cisco TelePresence Management Suite (TMS) Version 15
3. Configure the fields as follows:
Display
Name
Name
The FindMe location name; for example, Office, Home Office or On the Road. This appears as
a FindMe location when users configure their FindMe.
a FindMe location when users configure their FindMe.
Ring
Duration
Duration
This setting defines how long (in seconds) to let the devices in the current location ring before the
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
4. Click Save.
Associating device templates with location templates
For each location template you add, you must designate at least one device that should be dialed by default
whenever a user's FindMe address is contacted.
whenever a user's FindMe address is contacted.
You can also specify which devices to dial:
n
If the designated default devices are busy.
n
If a call is not answered within the location's configured ring duration.
To associate devices to a location:
1. In Cisco TMS, go to
System > Provisioning > FindMe
, click the
Location Templates
container, and
then in the explorer view, click the location template to which you want to assign a device template.
2. In the
Device Templates
pane, click Assign Templates. The
Configure Device Templates
dialog box
opens.
Cisco TMSPE Provisioning Deployment Guide
Page 46 of 78
Deploying FindMe
Setting up FindMe locations and devices