Cisco Cisco TelePresence Management Suite (TMS) Version 15
4. We recommend that you set Caller ID to FindMe ID. The options are:
l
FindMe ID: the caller ID of a call being made through this Cisco VCS is replaced with the relevant
FindMe ID.
FindMe ID.
l
Incoming ID: the caller ID is not altered; the caller ID presented to the called endpoint will be the ID of
the endpoint initiating the call.
the endpoint initiating the call.
5. Click Save.
Sending and returning calls via ISDN gateways
This section describes how to use FindMe with calls that are routed via an ISDN gateway (for example, when
calling a mobile phone, or some other ISDN accessible destination).
calling a mobile phone, or some other ISDN accessible destination).
If the Cisco VCS has Caller ID (
Applications > FindMe > Configuration
) set to use the FindMe ID, the
caller ID presented will be the user's E.164 phone number. The E.164 phone number would either have been
entered manually when the user account was configured, or supplied by AD (from the Office Phone number)
if Cisco TMS created the account for AD provisioned users.
entered manually when the user account was configured, or supplied by AD (from the Office Phone number)
if Cisco TMS created the account for AD provisioned users.
If the called party returns the call (and the E.164 number is routed by the network to an ISDN gateway on the
video network), the call will be received by the ISDN gateway and forwarded to Cisco VCS with the E.164
phone number as the called number.
video network), the call will be received by the ISDN gateway and forwarded to Cisco VCS with the E.164
phone number as the called number.
Cisco VCS therefore needs to be configured to route this call to the relevant FindMe ID in order to call the
user's endpoints. This can be carried out either by using another FindMe entry, or by setting up ENUM.
user's endpoints. This can be carried out either by using another FindMe entry, or by setting up ENUM.
Using FindMe to convert E.164 numbers to FindMe IDs
This method uses an additional FindMe account to redirect E.164 dialed numbers to URIs.
For each user with both a URI-style or H.323 ID FindMe ID and an associated E.164 phone number, set up a
second user account with:
second user account with:
n
the Username, for example 123456-name.surname
n
the FindMe ID set to the user's E.164 phone number
n
the Principal device address set to the FindMe ID of their main account
This is a static mapping, so the user will not ever need to log in to this second (E.164) account. Any changes
to devices associated with that user are always made in their main account.
to devices associated with that user are always made in their main account.
Cisco TMSPE Provisioning Deployment Guide
Page 49 of 78
Deploying FindMe
Sending and returning calls via ISDN gateways