Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Deploying FindMe
Cisco TMSPE Provisioning Deployment Guide
Page 55 of 88
box is displayed.
4. In the Assigned column, check each location you want to assign to the group.
5. Optionally, in the Active Location column, use the radio button to indicate the default active location for
users in the group.
6. Click Save.
7. Click Regenerate Locations and Devices... to apply the templates for all accounts and subgroups in the
Note that while you cannot assign templates directly to single users/accounts, you can access the FindMe
portal on their behalf and modify their locations and devices. See
portal on their behalf and modify their locations and devices. See
Setting up FindMe on Cisco VCS
The Cisco VCS must have FindMe functionality enabled so that it knows to route calls to the devices
associated with a user's FindMe ID.
associated with a user's FindMe ID.
To enable FindMe on the Cisco VCS:
1. Ensure that the VCS has the FindMe option key installed (
Maintenance > Option keys
). If it does not,
contact your reseller to obtain a key.
2. Go to the
FindMe configuration
page (
Applications > FindMe > Configuration
).