Cisco Cisco TelePresence Management Suite (TMS) Version 15
Deploying with a load balancer
Cisco TMS Redundancy Deployment Guide
Page 14 of 27
1. In the Cisco TMS application go to
Administrative Tools > Configuration > Network Settings
.
2. Check that the following IP address(es) and host names are set to the NLB's virtual IP address(es) and
host name:
l
Event Notification >
SNMP Traphost IP Address
l
Advanced Network Settings for Systems on Internal LAN: all fields
l
Advanced Network Settings for Systems on Public Internet/Behind Firewall
Recovery in case of a failing node
No immediate action is required in the event of a server failure, as the NLB will automatically detect the
failure and direct all traffic to the other node.
failure and direct all traffic to the other node.
Troubleshoot the failing node’s software and hardware as you normally would, and bring it back online once it
is operational.
is operational.
The NLB will detect that the node is up again and traffic will then be forwarded to both nodes as normal.