Cisco Cisco TelePresence Management Suite (TMS) Version 15

Page of 56
 
Requirement
CPU
4 cores (Xeon 2.4 GHz or larger), dedicated
Memory
16 GB, dedicated
Disk space provided on server
60 GB
When planning for a large deployment, also keep in mind that:
 
The disk space needed for a large tmsng database is typically 20-30 GB.
 
The size of the three Cisco TMSPE databases will not exceed 6 GB in most deployments.
 
The prime performance limiters in SQL Server are RAM and disk I/O. For optimum performance, increase these 
values as much as possible.
Cisco TMSXE Server
The requirements for this server correspond to the recommended hardware requirements for the supported operating 
systems.
Recommended Cisco TMS Configuration Changes
To decrease the load on SQL Server and Cisco TMS services in a large deployment, we strongly recommend the 
following settings :
 
Administrative Tools > Configuration > Conference Settings: Set Default Reservation Type for Scheduled 
Calls
 to One Button To Push
 
   Administrative Tools > Configuration > General Settings: Set Route Phone Book Entries to No
 
    Administrative Tools > Configuration > Network Settings: Set Enable Ad Hoc Conference Discovery to 
Only for MCUs or No.
Recommended Hardware and Virtualization for Large Deployments
Cisco has tested and recommends the following specifications for large deployments up to the supported maximum. 
Using the specifications described below, the entire Cisco TMS deployment can be hosted on a single rack-mounted 
server.
Hardware
Server
Cisco UCS C220 M3S Rack Server
CPU
2 x Intel Xeon Processor E5-2430 v2 (2.50 GHz)
Disk
8 x 146GB 6G SAS 15K RPM SFF HDD/hot plug/drive sled mounted, in a RAID-6  configuration. 
Part number: A03-D146GC2.
Disk controller
LSI MegaRAID 9265-8i 6Gb/s
Memory
4 x 8 GB/1600 MHz
Hypervisor 
software
VMware ESXi 6.0 and 5.5 host the three virtual machines with the specifications described 
below.
10
Cisco TelePresence Management Suite Provisioning Extension with Cisco Unified CM  Deployment Guide