Cisco Cisco TelePresence Management Suite (TMS) Version 15
6.
Click Save.
7.
Click Regenerate Locations and Devices... to apply the templates for all accounts and subgroups in the current
group. See
group. See
for details.
Note that while you cannot assign templates directly to single users/accounts, you can access the FindMe portal on their
behalf and modify their locations and devices. See
behalf and modify their locations and devices. See
.
Setting up FindMe on Cisco VCS
The Cisco VCS must have FindMe functionality enabled so that it knows to route calls to the devices associated with a
user's FindMe ID.
user's FindMe ID.
Check FindMe Option Key
Ensure that the Cisco VCS has the FindMe option key installed (Maintenance > Option keys). If it does not, contact your
reseller to obtain a key.
reseller to obtain a key.
Set up a Cluster Name
When using FindMe, you must set up the Cisco VCS with a cluster name regardless of whether it is part of a cluster.
To set up or change the cluster name:
1.
Go to System > Clustering.
2.
Enter the Cluster name:
—
If the Cisco VCS is part of a cluster, set it to the fully qualified domain name used in SRV records that address
the cluster, for example "cluster1.example.com".
the cluster, for example "cluster1.example.com".
—
If the Cisco VCS is not part of a cluster, set it to the fully qualified domain name used in SRV records that
address the Cisco VCS, for example "vcs1.example.com".
address the Cisco VCS, for example "vcs1.example.com".
3.
Click Save.
Enable and Configure FindMe Settings
To enable and configure FindMe on the Cisco VCS:
1.
Go to Applications > FindMe.
2.
Set FindMe mode to
On.
76
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide