Cisco Cisco TelePresence Management Suite (TMS) Version 15
3.
Click the Add Systems button in the right pane. Follow the instructions in Cisco TMS to add the Cisco VCS.
4.
Enter the FQDN of the Cisco VCS, for example
vcs1.example.com
, and click Next.
Cisco TMS will collect information from the VCS about how best to communicate with it.
Enabling Provisioning on the Cisco VCS
Setting up a Cisco VCS cluster and enabling provisioning are separate processes and should not be attempted
simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and complete the provisioning
configuration as described below. Then set up the cluster as described in
simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and complete the provisioning
configuration as described below. Then set up the cluster as described in
Setting up a Cluster Name
When using FindMe, you must set up the Cisco VCS with a cluster name regardless of whether it is part of a cluster. The
cluster name must be unique compared to any other Cisco VCS or Cisco VCS cluster managed by this Cisco TMS.
cluster name must be unique compared to any other Cisco VCS or Cisco VCS cluster managed by this Cisco TMS.
To set up or change the cluster name:
1.
Go to
System > Clustering
.
2.
Enter the Cluster name:
—
If the Cisco VCS is part of a cluster, set it to the fully qualified domain name used in SRV records that address
the cluster, for example "cluster1.example.com".
the cluster, for example "cluster1.example.com".
—
If the Cisco VCS is not part of a cluster, set it to the fully qualified domain name used in SRV records that
address the Cisco VCS, for example "vcs1.example.com".
address the Cisco VCS, for example "vcs1.example.com".
3.
Click Save.
18
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide