Cisco Cisco TelePresence Management Suite (TMS) Version 15
Set up a Cluster Name
When using FindMe, you must set up the Cisco VCS with a cluster name regardless of whether it is part of a cluster.
To set up or change the cluster name:
1.
Go to
System > Clustering
.
2.
Enter the Cluster name:
—
If the Cisco VCS is part of a cluster, set it to the fully qualified domain name used in SRV records that address
the cluster, for example "cluster1.example.com".
the cluster, for example "cluster1.example.com".
—
If the Cisco VCS is not part of a cluster, set it to the fully qualified domain name used in SRV records that
address the Cisco VCS, for example "vcs1.example.com".
address the Cisco VCS, for example "vcs1.example.com".
3.
Click Save.
Enable and Configure FindMe Settings
To enable and configure FindMe on the Cisco VCS:
1.
Go to
Applications > FindMe
.
2.
Set FindMe mode to
On.
3.
We recommend that you set Caller ID to
FindMe ID. The options are:
—
FindMe ID: the caller ID of a call being made through this Cisco VCS is replaced with the relevant FindMe ID.
—
Incoming ID: the caller ID is not altered; the caller ID presented to the called endpoint will be the ID of the
endpoint initiating the call.
endpoint initiating the call.
For more details on the use of Caller ID and FindMe ID, see
4.
Click Save.
Sending and Returning Calls via ISDN Gateways
This section describes how to use FindMe with calls that are routed via an ISDN gateway (for example, when calling a
mobile phone, or some other ISDN accessible destination).
mobile phone, or some other ISDN accessible destination).
If the Cisco VCS has Caller ID (
Applications > FindMe
) set to use the
FindMe ID, the caller ID presented will be the
user's E.164 phone number. The E.164 phone number would either have been entered manually when the user account
was configured, or supplied by AD (from the Office Phone number) if Cisco TMS created the account for AD provisioned
users.
was configured, or supplied by AD (from the Office Phone number) if Cisco TMS created the account for AD provisioned
users.
If the called party returns the call (and the E.164 Alias is routed by the network to an ISDN gateway on the video
network), the call will be received by the ISDN gateway and forwarded to Cisco VCS with the E.164 phone number as
the called number.
network), the call will be received by the ISDN gateway and forwarded to Cisco VCS with the E.164 phone number as
the called number.
71
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide