Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Setting up Cisco TelePresence Management
Server
Server
Cisco TelePresence Management Server is Cisco-provided server hardware that is delivered with the Cisco
TelePresence Management Suite software pre-installed. The server is intended for small to medium-sized
networks (up to 100 managed systems).
TelePresence Management Suite software pre-installed. The server is intended for small to medium-sized
networks (up to 100 managed systems).
Operator safety summary
Carefully observe all warnings, precautions and instructions when operating the equipment.
Equipment markings
The lightning flash symbol within an
equilateral triangle is intended to alert the
user to the presence of uninsulated
dangerous voltages within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electrical
shock.
equilateral triangle is intended to alert the
user to the presence of uninsulated
dangerous voltages within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electrical
shock.
The exclamation mark within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance/servicing instructions
accompanying the equipment.
triangle is intended to alert the user to the
presence of important operating and
maintenance/servicing instructions
accompanying the equipment.
Warnings
n
Water and moisture: Do not operate apparatus under or near water—for example near a bathtub, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool or in areas with high humidity.
sink, or laundry tub, in a wet basement, or near a swimming pool or in areas with high humidity.
n
Cleaning: Unplug apparatus from wall outlet before cleaning or polishing. Do not use liquid cleaners or
aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning the exterior of the
apparatus.
aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning the exterior of the
apparatus.
n
Ventilation: Do not block any of the ventilation openings of the apparatus. Install in accordance with
instructions. Never cover the slots and openings with a cloth or other material. Never install the apparatus
near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
instructions. Never cover the slots and openings with a cloth or other material. Never install the apparatus
near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
n
Grounding or polarization: Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician.
polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician.
n
Power-cord protection: Route power cord to avoid it being walked on or pinched by items placed upon or
against it, paying particular attention to the plugs, receptacles, and the point where the cord exits from the
apparatus.
against it, paying particular attention to the plugs, receptacles, and the point where the cord exits from the
apparatus.
n
Attachments: Only use attachments as recommended by the manufacturer.
Cisco TelePresence Management Suite Installation Guide (14.2)
Page 26 of 44
Setting up Cisco TelePresence Management Server