Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Setting up Cisco TelePresence Management Server
Cisco TelePresence Management Suite Installation and Getting Started Guide (13.1)
Page 39 of 75
Configuring the server OS
To complete the physical installation of the server, several basic server OS settings must be configured
using the web interface for Microsoft Server. The following steps must be completed from another
computer on the network that has Internet Explorer (ActiveX required) installed and network access to
the Cisco TelePresence Management Server.
using the web interface for Microsoft Server. The following steps must be completed from another
computer on the network that has Internet Explorer (ActiveX required) installed and network access to
the Cisco TelePresence Management Server.
1. In the web browser URL field enter https://<ManagementServerIPAddress>:8098 where
<ManagementServerIPAddress> is the IP address of the Cisco TelePresence Management Server
that you configured previously.
that you configured previously.
2. If you see a security warning stating "There is a problem with this web site's security certificate" – this
is normal because your browser does not trust the default server certificate that is pre-installed. Click
Continue to this website.
Continue to this website.
3. When prompted, enter the username Administrator and password TANDBERG.
4. Change the default administrator password:
4. Change the default administrator password:
a. Go to
Welcome > Set Administrator Password
.
b. Set a new password and click OK to save the changes.
c. When the change is confirmed, click OK to return to the Welcome Screen.
The default password for the administrator account is TANDBERG. This account has full access to
the Windows Server operating system: therefore assign it a strong, secure password.
the Windows Server operating system: therefore assign it a strong, secure password.
CAUTION:
Do not lose your administrator password.Cisco cannot recover lost passwords. You will
need to return the Cisco TelePresence Management Server to the factory for repair and all customer
data will be lost.
data will be lost.
5. Set the Server Time and Time Zone:
a. Go to
Maintenance > Date/Time
.
b. Update the Time, Date, and Time Zone settings.
c. Click OK.
c. Click OK.
6. Go to
Welcome > Set Server Name
, configure the server's name and Domain membership and click
OK.