Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Setting up Cisco TelePresence Management Server
Cisco TelePresence Management Suite Installation and Getting Started Guide (13.2)
Page 39 of 77
Configuring the server OS
To complete the physical installation of the server, several basic server OS settings must be configured
using the web interface for Microsoft Server. The following steps must be completed from another computer
on the network that has Internet Explorer (ActiveX required) installed and network access to the Cisco
TelePresence Management Server.
using the web interface for Microsoft Server. The following steps must be completed from another computer
on the network that has Internet Explorer (ActiveX required) installed and network access to the Cisco
TelePresence Management Server.
1. In the web browser URL field enter https://<ManagementServerIPAddress>:8098 where
<ManagementServerIPAddress> is the IP address of the Cisco TelePresence Management Server that
you configured previously.
you configured previously.
2. If you see a security warning stating "There is a problem with this web site's security certificate" – this is
normal because your browser does not trust the default server certificate that is pre-installed. Click
Continue to this website.
Continue to this website.
3. When prompted, enter the username Administrator and password TANDBERG.
4. Change the default administrator password:
a. Go to
Welcome > Set Administrator Password
.
b. Set a new password and click OK to save the changes.
c. When the change is confirmed, click OK to return to the Welcome Screen.
The default password for the administrator account is TANDBERG. This account has full access to the
Windows Server operating system: therefore assign it a strong, secure password.
Windows Server operating system: therefore assign it a strong, secure password.
CAUTION:
Do not lose your administrator password.Cisco cannot recover lost passwords. You will need
to return the Cisco TelePresence Management Server to the factory for repair and all customer data will be
lost.
lost.
5. Set the Server Time and Time Zone:
a. Go to
Maintenance > Date/Time
.
b. Update the Time, Date, and Time Zone settings.
c. Click OK.