Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Getting started with Cisco TMS
Cisco TelePresence Management Suite Installation and Getting Started Guide (13.2)
Page 58 of 77
To build your own folder structure:
1. Click on the
Company Name
folder in the tree. The right panel will update to show the contents of that
folder.
2. Click the Edit This Folder button at the top right side of the screen.
3. Rename the folder with the appropriate company name.
4. Click Save.
5. Add any additional folders you wish to add. To add a folder:
a. Click on the parent folder you want from the tree.
b. In the right panel, click New Folder.
c. Enter a name and description (optional).
d. Click Save.
e. Repeat steps a-d for as many folders as you wish to create. You can also add and remove folders at a
later time.
Adding a system
There are four different ways to add systems to Cisco TMS, represented by four different tabs in the
interface:
interface:
n
Add Systems
: Add systems by IP range, comma-separated IP or host address list.
n
From List
: Add existing systems to a new folder, including systems that have been auto-discovered by
Cisco TMS.
n
Pre Register Systems
: Have a system register automatically when it comes online. Enter a system name
and primary identifier (MAC address recommended), and select whether to apply a configuration template.
n
Add Room/Equipment
: Add rooms or equipment such as projectors or dvd players. Advanced settings
are available when adding rooms.
Refer to the help system for detailed information on the available settings on each tab. The following example
uses the
uses the
Add Systems
tab:
1. Go to
Systems > Navigator
.
2. Open Discovered Systems to verify that the system you are planning to add has not been added
automatically by Cisco TMS already. Automatic System Discovery is enabled as part of the installation.
l
l
If the system is not in the Discovered Systems folder, select the folder you want the system added to.