Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Initial Cisco TMS setup
The Cisco TMS configuration can generally be modified at any point after deployment and during operation.
However, for ease of maintenance and operation, we recommend that you configure user account policies,
zones, and basic conference defaults immediately after installation and before allowing users into the
system.
However, for ease of maintenance and operation, we recommend that you configure user account policies,
zones, and basic conference defaults immediately after installation and before allowing users into the
system.
Instructions can be found in the built-in Cisco TMS help or Cisco TMS Administrator Guide.
User management
We strongly recommend using Microsoft Active Directory to manage all Cisco TMS users.
Zones
You can configure an initial zone setup during installation. To view or modify the configuration after
installation, go to
installation, go to
Administrative Tools > Locations > ISDN Zones
or
> IP Zones
.
Folder hierarchy
Before beginning to add systems to Cisco TMS, we strongly recommend planning a well-structured and
scalable folder hierarchy for endpoints and infrastructure systems in
scalable folder hierarchy for endpoints and infrastructure systems in
Systems > Navigator
.
Default settings for conferences
Before users start booking conferences, we recommend that you review and adjust the default settings for
connection type, bandwidth, and so on. Go to
connection type, bandwidth, and so on. Go to
Administrative Tools > Configuration > Conference
Settings
.
Cisco TelePresence Management Suite Installation and Upgrade Guide (14.6)
Page 22 of 56
Deployment best practices