Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Field label
Description
Sender E-mail
Address
Address
The email address you wish to appear in the From field of messages sent by Cisco
TMS. Example: videomanagement@example.com.
TMS. Example: videomanagement@example.com.
SMTP Server
Address
Address
The network address of the SMTP server Cisco TMS will use to send email. Additional
authentication configuration settings can be set up post installation as needed.
authentication configuration settings can be set up post installation as needed.
5. Click Next when done modifying the settings.
Cisco TMS then contacts the supplied SMTP server to verify the settings and warns you if it was not able
to contact the server.
If this is a new installation, the
to contact the server.
If this is a new installation, the
IP/ISDN Zone
screen will then be displayed.
Pre-configuring zones and setting install folder location
Zones are a configuration concept used by Cisco TMS to route phone numbers and aliases when scheduling
calls and using phone books.
calls and using phone books.
The information entered during installation creates the first IP and ISDN zones in Cisco TMS, which will be
set as the initial default to allow a basic IP and ISDN network to operate after installation. Additional zones
and configurations must be added post installation for networks with multiple locations or more complex
elements.
set as the initial default to allow a basic IP and ISDN network to operate after installation. Additional zones
and configurations must be added post installation for networks with multiple locations or more complex
elements.
Cisco TelePresence Management Suite Installation and Upgrade Guide (14.5)
Page 26 of 56
Installing or upgrading Cisco TMS