Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
102
This cause indicates that a procedure has been initiated by the expiry of a timer in association with Q.931
error handling procedures.
error handling procedures.
103
This cause indicates that the equipment sending this cause has received a message which includes
parameters not recognized because the parameters are not defined or are defined but not implemented by
the equipment sending this cause.
parameters not recognized because the parameters are not defined or are defined but not implemented by
the equipment sending this cause.
110
This cause indicates that the equipment sending this cause has discarded a received message which
includes a parameter that is not recognized.
includes a parameter that is not recognized.
111
This cause is used to report a protocol error event only when no other cause in the protocol error class
applies.
applies.
127
This cause indicates that there has been internetworking which does not provide causes for actions. The
precise cause for a message being sent is not known.
precise cause for a message being sent is not known.
128
This cause is used when the called user has indicated the inability to accept another call.
129
This cause indicates that the equipment sending this cause does not wish to accept this call, although it
could have accepted the call because the equipment sending this cause is neither busy nor incompatible.
could have accepted the call because the equipment sending this cause is neither busy nor incompatible.
130
This cause indicates that the destination requested by the calling user cannot be reached because,
although the number is in a valid format, it is not currently assigned.
although the number is in a valid format, it is not currently assigned.
131
This cause indicates that the destination can not be reached caused by an unknown reason.
132
This cause indicates that the destination can not be reached caused by a generic error.
133
This cause indicates that the gatekeeper rejected the call.
134
This cause indicates that the gatekeeper could not find the number.
135
This cause indicates that the gatekeeper timed out the call.
136
This cause indicates that the gatekeeper is not active.
255
Cisco specific. Not part of ITU-T standard.
1000
range
range
Used for mapping TC & TE codes. Cisco TMS adds 1000 to the number sent by the endpoint. For standard
cause codes this corresponds to the numbers for the cause codes listed above.
cause codes this corresponds to the numbers for the cause codes listed above.
Table 178 Cause codes based on the ITU-T standard (continued)
Accessibility notice
Cisco is committed to designing and delivering accessible products and technologies.
The Voluntary Product Accessibility Template (VPAT) for Cisco TelePresence Management Suite is available here:
http://www.cisco.com/web/about/responsibility/accessibility/legal_regulatory/vpats.html#telepresence
You can find more information about accessibility here:
288
Cisco TelePresence Management Suite Administrator Guide
Accessibility notice