Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
3.
Select the system(s) and click Next.
The
Select Software and Release Keys
page opens.
4.
Fill in:
—
The software version, using the drop-down list in the Software field.
—
The Date and Start Time you want for the scheduled upgrade.
—
For legacy systems a Release Key for the software may be required.
5.
Click Upgrade.
—
For systems on the organization's network, you can now verify that the upgrade has been scheduled or
initiated by going to
initiated by going to
Systems > System Upgrade > System Upgrade Activity Status
.
—
Systems behind a firewall/NAT must now be booted. Cisco TMS will initiate the upgrade when receiving
the boot event.
the boot event.
Applying the Same Upgrade to Endpoints with the Same Software Version
To select the same software file in the Software drop-down list for all systems with a similar software version:
1.
Choose Software on one system.
2.
Click the Apply to all link displayed to the right of the drop-down.
All systems affected will have the same software file selected and will be highlighted.
Purging a System
Cisco TMS differentiates between deleting and purging a system.
■
You can use a Delete operation to delete a system from a folder. It will still have an entry in the Cisco TMS
database and may appear in one or more additional folders.
database and may appear in one or more additional folders.
■
If you Purge a system, its database entry is permanently removed.
Using the Navigator
1.
Go to
Systems > Navigator
and locate a folder where the system is displayed.
2.
Check the system you want to remove.
3.
Click Delete.
A confirmation prompt is displayed asking you whether you want to delete the system from the folder or purge it
entirely from the database.
entirely from the database.
4.
Click Purge.
Using the Purge Systems Page
1.
Go to
Systems > Purge Systems
.
2.
Select the system you want to remove.
55
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems